Cool touch finishing agent SL-COO1

▍Product Description 

The special cooling active ingredients can quickly take away moisture and heat, giving an excellent  "cooling" feeling and a long-lasting cooling comfort. It is non-irritating to the skin and  meets environmental protection requirements. It is suitable for various synthetic fibers and their blended fabrics and can be  treated by padding or dipping.

1.  Give the fiber a soft feel and a special "cool" feeling 

2.  Excellent moisture absorption and perspiration wicking performance, especially quick drying and quick drying performance 

3.  Give synthetic fibers good antistatic properties

4.  Low yellowing, low foaming, shear resistance, suitable for various processing technologies such as overflow tank dipping and padding 

5.  Safety for consumers: non-toxic, safe for human body, in line with environmental protection requirements Chemical composition: menthol and cooling active ingredients  Ionicity:  non-ionic 

▍Nature​    

Appearance:  Yellow to dark yellow translucent liquid  pH value:  4.0 ~ 7.0 (10% aqueous solution)  Specific gravity:  ~ 1.0 (at 20°C)  Solubility:  Soluble in cold water 

▍How to use    

This product can be directly added to the working fluid.

It can also be diluted with cold water before use (  diluting with warm or hot water  may result in unevenness or even precipitation).

Adjust the dosage according to different types of fabrics, yarns and desired  effects . The recommended process is as follows:

Application:  Dipping method:  Dosage  1 ~ 4% (owf)  pH value  4.5 ~ 6.5  Bath ratio  1:10  Treatment  50 ~ 70 ℃ × 30min  Drying  120 ~ 130 ℃ 

Padding method:  dosage  10 ~ 40 g/L  pH value  4.5 ~ 6.5  padding rate  60 ~ 80%  setting temperature  120 ~ 170℃

▍Packaging : plastic barrel     

Place in a cool and ventilated warehouse.  The storage period of the emulsion at room temperature is 12 months.  If it is stored below 0℃ and above 40℃ for a long time,

The product consistency will change . When heated or cooled to 20~25℃ and then well mixed, the product can be  reused without any problem . 

If stored at 30°C for a long time, the viscosity of the product will increase and its solubility will decrease. Therefore  , in order to avoid errors in technical application, the product must be dissolved or diluted with cold water.